Aerocool Edge 14 Pro Black
Edge 14 Pro
14CM ARGB FANS x 3
H66F HUB x 1
REMOTE CONTROL x 1
140mm fan with 6-Pin connector featuring a stylish RGB LED Dual Lighting design. Access 16.8 million colors using compatible Addressable RGB motherboards including ASUS Aura Sync, MSI Mystic Light Sync, and Gigabyte RGB Fusion.
Comes equipped with three Edge 14 Addressable RGB fans, H66F RGB Control Hub, and Remote Control.
- Comes with 3 x Edge 14 fans, 1 x H66F RGB Control Hub, and 1 x Remote Control
- RGB LED Dual Lighting design adds extra flair to your rig
- Designed for 12cm fan mounts (requires space for 14cm fan)
- Access 16.8 million colors using compatible Addressable RGB motherboards
- H66F hub allows you to connect up to six 6-Pin ARGB fans and up to two ARGB accessories with +5V ARGB connector
- H66F hub comes with PWM control functions for optimized fan RPM
ADDRESSABLE RGB COMPATIBLE
Take full control of your Edge 14 Addressable RGB fans using any one of three ways:
LED CONTROL BUTTON
RGB REMOTE CONTROL
H66F RGB CONTROL HUB
Features a 6-port hub with PWM control functions that allows you to connect up to six 6-Pin Addressable RGB fans and up to two Addressable RGB accessories with 5V ARGB connector.
Motherboard connector supports Addressable RGB motherboards (Asus Aura Sync, MSI Mystic Light Sync, and Gigabyte RGB Fusion).
PWM CONTROL FUNCTIONS
H66F hub comes with PWM control functions for optimized fan speed to maximize cooling efficiency and minimize noise.
Please check if the 4-Pin fan header on your motherboard is PWM compatible.
• PWM based – PWM compatible
• Voltage based – not PWM compatible
For more information, refer to our PWM Compatibility Guide.
ADDRESSABLE RGB RECEPTOR CABLE INCLUDED
Comes with a receptor cable to connect your hub with compatible Addressable RGB motherboards.
ARGB MB Connector (For all other ARGB MBs such as ASUS, MSI, etc.)
ARGB MB Connector (Gigabyte RGB Fusion)
4-PIN Hub Connector
PWM 4-Pin Connector
POWER CABLE INCLUDED
Comes with a cable to power the hub.
SATA Power Connector
4-Pin Hub Power Connector
RGB LED DUAL LIGHTING
Equipped with RGB LED Lighting to give your rig stylish flair while providing superior cooling capabilities to improve performance.
Dual Lighting Design delivers a truly unique way to keep your system cool, in more ways than one.
DESIGNED FOR 12CM FAN MOUNTS
This fan was designed to be installed onto 12cm fan mounts but requires space for 14cm fan (Does not fit onto radiator).
CURVED FAN BLADES
Curved fan blades effectively direct airflow to increase air pressure and reduce air resistance for maximum cooling performance.
Anti-vibration pads absorb and dampen vibrations caused by fan rotation.
COMES WITH 6-PIN CONNECTOR
Connects to H66F RGB Control Hub. Compatible with Tor, Tor Pro, and Klaw cases.
|Model||Edge 14 Pro|
|Included||Edge 14 Fans x 3 | H66F Hub x 1 | Remote Control x 1|
|Fan Dimensions (L x W x H)||140mm x 140mm x 25mm|
|Fan Speed||800 rpm|
|Fan Starting Voltage||6 V|
|Fan Rated Voltage||12 V|
|Fan Rated Current||0.42 A|
|Power Consumption||5.04 W|
|Air Pressure||1.35 mmH2O|
|Air Flow||35.4 CFM|
|Fan Noise Level||19.7 dBA|
|Bearing Type||Hydraulic Bearing|
|Hub & Remote Control|
|Rated Voltage||12 V/5V|
|Rated Current||3 A|
|Port for fan||6|
|Port for 5V ARGB connector||2|
|Accessories||Velcro Strap x 1 |
Screw x 12
Black Zip Tie x 2
ARGB Receptor Cable x 1